Overview
The CABLE5CBL-L is a 22 AWG, five-conductor cable with a Santoprene jacket and an aluminum Mylar shield. By default, the conductors are stripped and tinned. The cable can also be fitted with a connector for attachment to a prewired enclosure.
This generic cable can be used with a variety of products. (See Compatibility.)
Read MoreTechnical Description
The CABLE5CBL-L is a 22 AWG, five-conductor cable with a Santoprene jacket and an aluminum Mylar shield. The conductors are stripped and tinned, and have red, black, green, blue, and white insulation colors. The cable can also be fitted with a connector for attachment to a prewired enclosure.
Refer to the Compatibility information for a list of products this cable is commonly used with.
Images
Specifications
| Cable Jacket Material | Santoprene |
| Gage | 22 AWG |
| Number of Conductors | 5 |
| Shield Material | Aluminum Mylar |
| Conductor Insulation Colors | Red, black, green, blue, and white |
Compatibility
This generic cable can be used with the following products:
| Product | Cable Purpose |
| SDMs | SDM-to-data-logger connection |
| AM16/32B | Signal Connections if using both shields in 4 x 16 mode |
| CS100, CS106 | Data-logger-to-barometer connection when the barometer and data logger are housed in different enclosures |
| A21REL-12 | Controls three relays |
| A6REL-12 | Controls three relays |
| CC640 | MD485-to-CC640 connection |
| HUB-SDM5 | SDM-to-HUB-SDM5 connections and data-logger- to-HUB-SDM5 connection (up to six cables needed) |
| HUB-SDM8 | SDM-to-HUB-SDM8 connections and data-logger- to-HUB-SDM8 connection (up to six cables needed) |
| AVW1, AVW4, AVW100 | Data-logger-to-interface connection |
Listed Under
- SDM-CD8S - Eight-Channel Solid-State DC Controller
- SDM-CD16S - 16-Channel Solid-State DC Controller
- SDM-CD16ACA - 16-Channel AC/DC Relay Controller
- SDM-SIO1A - 1-Channel Serial I/O Module
- SDM-SIO4A - 4-Channel Serial I/O Module
- SDM-AO4A - 4-Channel Analog Output Module
- CS100 - Barometric Pressure Sensor
- CS106 - Barometer (500 to 1100 hPa)
- SDM-IO16A - 16-Channel Input/Output Module
- SDM-CAN - Datalogger-to-CANbus Interface Module
- TDR200 - Time-Domain Reflectometer
- A6REL-12 - 6-Channel Relay Driver with Manual Override
- A21REL-12 - 4-Channel Relay Driver
- AM16/32B - 16- or 32-Channel Relay Multiplexer
- SDM-SIO2R - Two-Channel Serial I/O Module with Relays
FAQs for
Number of FAQs related to CABLE5CBL-L: 1
-
Whenever possible, purchase a sensor with the desired cable length. Some sensors have a user-specified cable length, whereas other sensors have a set cable length.
Sometimes, an old cable can be replaced with a new, longer cable.
Generally, additional cable cannot be spliced onto the existing cable because:
- Some sensor cables have bridge completion resistors at the pigtail end
- Some sensors are calibrated based on cable length
- Sometimes the color in the insulation is not the same as that visible at the pigtail end
- It is possible to introduce errors or malfunctions depending on the integrity of the splice
Splicing cable together increases the likelihood that water may enter the cable and cause shorting, corrosion, and some other potential issues, which in turn can cause measurement issues.
Because of the potential issues, do not splice any sensor cable without first contacting Campbell Scientific to discuss the sensor in detail.
Privacy Policy Update
We've updated our privacy policy. Learn More
Cookie Consent
Update your cookie preferences. Update Cookie Preferences