RETIRED ›
This product is no longer available. Some accessories, replacement parts, or services may still be available.
CFM100 CompactFlash Module
Services Available
Repair No
Free Support Yes

Overview

The CFM100 stores the datalogger's data on a removable CompactFlash (CF) card. The CFM100/CF card combination can be used to expand the datalogger's memory, transport data/programs from the field site(s) to the office, and upload power up functions. The module connects to the 40-pin peripheral port on a CR1000 or CR3000 datalogger.

Read More

Benefits and Features

  • Used to expand data storage of our CR1000 and CR3000 dataloggers
  • Connects to the data logger's peripheral port
  • Small, light-weight CF cards fit in your pocket for easy transport between the data logger and PC

Technical Description

The CFM100 includes a card slot that can fit one Type I or Type II CF card. Only industrial-grade CF cards should be used with our products. Although consumer-grade cards cost less than industrial-grade cards, the consumer-grade cards are more susceptible to failure resulting in both the loss of the card and its stored data. Industrial-grade cards also function over wider temperature ranges and have longer life spans than consumer-grade cards.

Data stored on the card can be retrieved either by removing the card and carrying it to a computer or through a communications link with the datalogger. The computer can read the CF card either with the computer’s PCMCIA slot and the CF1 adapter or the computer’s USB port and the 17752 Reader/Writer.

CardConvert is used to convert and save binary data from a CompactFlash card. CardConvert is included in our PC200W, PC400, LoggerNet, and RTDAQ datalogger support software.

Software Requirements

  • LoggerNet version 3.1.3 or later
  • PC400 version 1.2.1 or later

Datalogger Operating System (OS) Requirements

The CR1000 OS must be OS 4 or later. Both the CR1000 and CR3000 need OS 25 or later to read cards with more than 2 GB of storage.

Images

Specifications

Storage Capacity 256 MB, 2 GB, or 16 GB
Typical Access Speed 200 to 400 kbits s-1
Memory Configuration User selectable; ring (default) or fill-and-stop
Power Requirements 12 V supplied through the data logger’s peripheral port
CF Card Requirements Industrial-grade
Temperature Range
  • -25° to +50°C (standard)
  • -55° to +85°C (extended)
Dimensions
  • 10.0 x 8.3 x 6.5 cm (4.0 x 3.3 x 2.6 in.)
  • 25.2 x 10.2 x 7.1 cm (9.9 x 4.0 x 2.8 in.) of CR1000 with CFM100 attached
Weight 133 g (4.7 oz)

Typical Current Drain
RS-232 Port Active
  • 30 mA (writing to card)
  • 20 mA (reading card)
RS-232 Port Not Active
  • 20 mA (writing to card)
  • 15 mA (reading card)
Low Power Standby 700 to 800 μA

Compatibility

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Dataloggers

Product Compatible Note
CR1000 (retired)
CR1000X
CR200X (retired)
CR216X (retired)
CR300 (retired)
CR3000
CR310
CR5000 (retired)
CR6
CR800 (retired)
CR850 (retired)
CR9000X (retired)

Mounting Equipment

Product Compatible Note
ENC10/12 Compatible when attached to the CR1000. The CFM100 is compatible with the CR3000 using the -NB option (base with no battery).
ENC12/14 Compatible when attached to the CR1000 or CR3000.
ENC14/16 Compatible when attached to the CR1000 or CR3000.
ENC16/18 Compatible when attached to the CR1000 or CR3000.

Additional Compatibility Information

CompactFlash (CF) Cards

Campbell Scientific offers and recommends several CF cards (see Ordering tab). These cards have passed Campbell Scientific's ESD testing and operate properly with our data loggers.

Only industrial-grade CF card should be used with our products. Although consumer-grade cards cost less than industrial-grade cards, the consumer-grade cards are more susceptible to failure resulting in both the loss of the card and its stored data. Industrial-grade cards also function over wider temperature ranges and have longer life spans than consumer-grade cards.

Data Retrieval

Data stored on the card can be retrieved either through a communications link with the data logger or by removing the card and carrying it to a computer. The computer can read the CF card either with the computer's PCMCIA slot and the CF1 adapter or the computer's USB port and the 17752 Reader/Writer.

Data Logger Considerations

The CFM100 fastens onto the data logger's 40-pin peripheral port. This means that the CFM100 is only compatible with the CR1000 and CR3000. It is NOT compatible with the CR800, CR850, CR200X, CR5000, or CR9000X dataloggers.

To read cards with more than 2 GB of storage, the data logger operating system must be OS 25 or later.

FAQs for

Number of FAQs related to CFM100: 20

Expand AllCollapse All

  1. Is it possible to report CFM100 diagnostics in hourly transmissions so that any issues are detected promptly?

    The CFM100 does not have any diagnostics that can be reported. The Status table does report the status of the CompactFlash card and the number of bytes free on the CF card.

  2. Does anything special need to be done in LoggerNet to retrieve data from the memory card in the CFM100?

    LoggerNet collects data from the data logger first. If there is additional data on a CompactFlash card, LoggerNet collects that also. Nothing special needs to be set up in LoggerNet to have this occur.

  3. Can data be retrieved using a wireless connection while data is being stored to a memory card?

    Yes.

  4. Could a recent OS upgrade cause data to continue to store on a CR1000 or CR3000 but no longer store on the CompactFlash card of a CFM100 or an NL115?

    No. Only a program change could cause this. To save data to a CFM100 or an NL115, a CardOut() or TableFile() instruction must be present in at least one data table.

  5. How can data from a CompactFlash card be stored in several files so that each day has a new file?

    Review the CRBasic Editor Help for information on the TableFile() instruction.

  6. Why would a CompactFlash card that works fine in cameras and computer drives not work in a CFM100 or NL115?

    For detailed information, review the information in the “CF Card Information” application note.

  7. What might cause the inability to transfer data from a data logger to a memory card?

    If the CardOut() or TableFile() instructions are configured as fill and stop, the data logger will stop writing data to the CompactFlash cards after they are full.

  8. When is a file on the card of a CFM100 or NL115 open?

    The file on the card is open until the program is stopped or the button on the device is pressed.

  9. Can any type of CompactFlash card be used with a CFM100 or NL115?

    Campbell Scientific always recommends using CF cards carried by Campbell Scientific. Although another CF card might fit and work with a CFM100 or NL115, the CF card might not be rated for the same temperature range as the CFM100 or NL115. In addition, another CF card might not have the same electrostatic discharge (ESD) immunity as the cards tested and carried by Campbell Scientific. For more detail on CF cards, see the “CF Card Information” application note.

  10. Why would disconnecting and reconnecting a CFM100 or NL115 make a data logger unable to detect the device?

    The CFM100 or NL115 is detected during the data logger boot-up cycle, that is, when it is powered on. Disconnect or connect the CFM100 or NL115 to a data logger only after power to the data logger has been disconnected. 

Visit the FAQ Library

Case Studies

California: Irrigation Control
Alfalfa is a thirsty crop. It uses more than 20 percent of all of the......read more
Explore All Case Studies

Privacy Policy Update

We've updated our privacy policy.  Learn More

Cookie Consent

Update your cookie preferences.  Update Cookie Preferences